美国LA-26附着力胶带的详细内容如下:美国LA-26附着力测试胶带/美国LA26胶带/LA-26试验胶带P-99已停产,代用胶带LA-26,LA-26是美国ASTM作为P-99为D3359-08附着力测试替换产品,American Puma Si P-99 alternative TapePolyester/rope fiber laminate; offers bulk and stiffness;hand tears for tabbing, holding & wrappingIntertape LA-26 Polyester/Rope-Fiber Laminate Tape combines the moisture, chemical, abrasion and puncture resistance of polyester film with the machine direction strength and dimensio
nal stability of rope-fiber paper backing, this pressure sensitive adhesive is designed for use in high temperature conditions. It is ideal for tabbing, holding and wrapping, masking PCB gold fingers during wave solder and HAL operations. It can also be used for "powder coat" masking. It is also currently being co
nsidered as a replacement to Permacel P-99 for ASTM D3359-08 adhesion testing.Physical CharacteristicsROLL SIZETensileAdhesionThicknessElongation1 in. x 60 yds.lb/inN/25mmoz/inN/25mmmilsmm%Actual Size: 25mm x 55m45.0197.060.016.76.00.152.0供应LA26胶带是美国ASTM作为P-99为D3359-08附着力测试替换产品,AmericanPermacelP-99 alternative Tape Polyester/rope fiber laminate; offers bulk and stiffness;hand tears for tabbing, holding & wrapping Intertape LA-26 Polyester/Rope-Fiber Laminate Tape combines the moisture, chemical, abrasion and puncture resistance of polyester film with the machine direction strength and dimensio
nal stability of rope-fiber paper backing, this pressure sensitive adhesive is designed for use in high temperature conditions. It is ideal for tabbing, holding and wrapping, masking PCB gold fingers during wave solder and HAL operations. It can also be used for "powder coat" masking. It is also currently being co
nsidered as a replacement to Permacel P-99 for ASTM D3359-08 adhesion testing. Physical CharacteristicsROLL SIZETensileAdhesionThicknessElongation1 in. x 60 yds.lb/inN/25mmoz/inN/25mmmilsmm% 25mm x 55m45.0197.060.016.76.00.152.0百格测试步骤:1.用刀口宽约10mm~12mm的百格刀在测试样本表面划10×10(100个) 的正方形小网格,以1mm~1.2mm为间隔,每一条划线应深及油漆的底层;2.用毛刷将测试区域的碎片刷干净;3.用P-99胶带或等同效力的胶纸牢牢粘住被测试的小网格,并用橡皮擦用力擦拭胶带以加大胶带与被测区域的接触面积及力度;4. 用手抓住胶带一端,在垂直方向(90°)迅速扯下胶纸,同一位置进行2次相同试验。结果判定: 手机客户要求附着力≥4B为合格。实验等级:ISO等级:0 =ASTM等级:5B (切口边缘完全光滑,格子边缘没有任何剥落) ISO等级:1 =ASTM等级:4B (在切口的相交处有小片剥落,划格区内实际破损≤5% )ISO等级:2 =ASTM等级:3B (切口的边缘和/或相交处有被剥落,其面积大于5%~15% )? ISO等级:3 =ASTM等级:2B (沿切口边缘有部分剥落或整大片剥落,或部分格子被整片剥落。剥落的面积超过15%~35% )ISO等级:4 =ASTM等级:1B (切口边缘大片剥落/或者一些方格部分部分或全部剥落,其面积大于划格区的35%~65% )ISO等级:5 =ASTM等级:0B(在划线的边缘及交叉点处有成片的油漆脱落,且脱落总面积大于65%)。 长期代理美国IPG测试胶带LA26。
核心提示:以上是美国LA-26附着力胶带的详细介绍内容,该产品信息美国LA-26附着力胶带是由深圳市宝安区荣华仪器经营部提供,如果要了解美国LA-26附着力胶带更多的详细内容请与该公司的相关人员联系!